Valve stem height

All Models and Years
Post Reply
aj_ed
Posts: 8
Joined: Fri Jan 26, 2024 9:50 am

Valve stem height

Post by aj_ed »

Well, I got my 140 heads back from sitting in a shop for 2 months, and found a great cylinder head shop. Problem is, I pulled the original seats out before dropping them off. Anybody have the spec from head to end of valve stem?
The # I got is about 2.00-2.05. I tapped in 2 old seats to get this diamention with 2 used valves. All guide work was done by me.
Ed
Top
Post Reply

Return to “Ask your Mechanical Questions here”