62 Dash Schematic

All Models and Years
User avatar
plmbcrzy
Posts: 35
Joined: Fri Aug 18, 2017 4:07 am

62 Dash Schematic

Post by plmbcrzy »

I'm putting a 62 3 Spyder instrument cluster in my 64 Monza all I have is the 64 assembly manual and it looks like things changed it would sure help me to have the schematic for the wiring harness I already have .

Sent from my [device_name] using Corvair Forum mobile app

User avatar
bbodie52
Corvair of the Month
Corvair of the Month
Posts: 11872
Joined: Mon Aug 06, 2012 12:33 pm
Location: Lake Chatuge Hayesville, NC
Contact:

Re: 62 Dash Schematic

Post by bbodie52 »

CORVAIR COMBINED WIRING SCHEMATIC DIAGRAMS

:link: viewtopic.php?f=225&t=12968

The manifold pressure/vacuum gauge is a mechanical (non-electric) instrument that requires a plastic (nylon) tubing to connect to the engine intake manifold. On the non-turbo engine in the Monza it is of little value. On the 1965-66 Corsa there wa a connection point for this gauge on the non-turbo 140 hp engine found on the vacuum balance tube, but you will not find that connection on the 110 hp Monza engine balance tube.

You will also not find a cylinder head temperature gauge thermistor on the 110 hp left cylinder head. Hard to find and usually expensive, and without the thermistor the gauge is useless.

Speedometer and fuel gauge are easily connected.

You will need to run a tachometer sennsing wire to the ignition coil negative terminal.
Brad Bodie
Lake Chatuge, North Carolina
Image 1966 Corvair Corsa Convertible
Post Reply

Return to “Ask your Mechanical Questions here”