I get a puff of blue smoke in between gears following a high vacuum situations it seems. It's pretty thick, but dissipates quickly.
Im hoping it's just the valve seals. I am going to do the seals with the heads on the engine.
Should I upgrade the valve springs while I'm at it to some dual springs? Its a 61. I know I've seen here that the early single springs are quite weak. Thanks
Puff of Blue Smoke in between gears? Valve seal question.
Puff of Blue Smoke in between gears? Valve seal question.
Last edited by lostboy on Wed Jun 14, 2017 6:51 am, edited 1 time in total.
-Steve
1961 Corvair 700 Sedan (80hp 3spd Gasoline Heat)
1961 Corvair 700 Sedan (80hp 3spd Gasoline Heat)
-
- Posts: 887
- Joined: Thu Sep 26, 2013 2:42 pm
Re: Puff of Blue Smoke in between gears? Valve seal question.
Before tear down, a compression test and leak down test on any low compression cylinders is appropriate.
Sent from my iPhone using Corvair Forum mobile app
Sent from my iPhone using Corvair Forum mobile app
Jerry Whitt
ASE CERTIFIED MASTER TECHNICIAN
Retired
Hemet, Callifornia
65 Monza, purchased new
65 Corsa convertible
ASE CERTIFIED MASTER TECHNICIAN
Retired
Hemet, Callifornia
65 Monza, purchased new
65 Corsa convertible