For Sale - 1964 Turbo Cylinder Heads

Buy or Sell Corvair parts.
Forum rules
All Classified posts will be automatically deleted approximately 90 days after posting.
Post Reply
User avatar
Nickshu
Posts: 809
Joined: Tue Jun 11, 2013 7:57 pm
Location: Northern Colorado, USA

For Sale - 1964 Turbo Cylinder Heads

Unread post by Nickshu » Fri Dec 29, 2017 7:23 am

ForSale - 1964 Turbo cylinder heads - Done by Ken Hand - Less than 600 miles on them.

These heads were the original heads on my '64 Spyder. Ken did them for me (all the work is outlined below) and I used them for about 600 miles then removed them and decided to go with closed chamber heads.

The work Ken did is outlined in the invoice in the next post. It included a comprehensive prep of the heads for durability and dependability.

Ceramic coated exhaust outlets are included (installed).

A piece of metal went in the intake and did some minor damage to the #3 chamber. See the photos...this damage will not affect function. The heads are currently at (and will ship from) Ken's shop - He checked them over and verified there is no issue with using them as is.

Spent over $2300 in head work on them with Ken.

Asking $1500 for them plus shipping from Ken's shop in Michigan, or pickup if you are local to him.

PM with questions or interest. Thanks!
http://i1273.photobucket.com/albums/y41 ... tqpw8.jpeg
http://i1273.photobucket.com/albums/y41 ... rgntp.jpeg
http://i1273.photobucket.com/albums/y41 ... 7vaym.jpeg
http://i1273.photobucket.com/albums/y41 ... 4ngrq.jpeg
http://i1273.photobucket.com/albums/y41 ... u9gyj.jpeg
http://i1273.photobucket.com/albums/y41 ... 6dgk0.jpeg
http://i1273.photobucket.com/albums/y41 ... xwnbm.jpeg




Sent from my SM-G930V using Tapatalk

Nick_______________________________
1964 Monza Spyder Convertible #435 - Rotisserie restored
Check out my restoration thread here: http://corvaircenter.com/phorum/read.php?1,681169
Recreational Mechanic/CORSA Member/COG Supporting Member/Navy Veteran

User avatar
Nickshu
Posts: 809
Joined: Tue Jun 11, 2013 7:57 pm
Location: Northern Colorado, USA

Re: For Sale - 1964 Turbo Cylinder Heads

Unread post by Nickshu » Fri Dec 29, 2017 7:27 am

Invoice for head work completed by Ken Hand in late 2015;

Description                                   Qty/Hours   Price/Rate       Total           



Clean and        Heads                 1           50               $50.00          

Inspect                                                                             


Mill Head        .030                  2           65               $130.00         

Gasket Area                                                                         


Mill Cyl. Head   Top Side              2           100              $200.00         


Valve guide,     Bronze                6           45               $270.00         

Installed                                                                           


Valve Guide      Intake                6           35               $210.00         

Liner, Bronze                                                                       


Valve Seat       Exhaust               6           9.5              $57.00         


Vavle Seat,                            6           4.5              $27.00          

Intake                                                                              


Valve Seat                             12          35               $420.00         

Labor                                                                               


Port head        Pocket Port           2.5         50               $125.00         


Deflash                                2           50               $100.00         

Cylinder Head                                                                       


Valve Grind, 3                         2           89               $178.00         

Angle                                                                               


Intake Valve                           6           6.5              $39.00          


Exhaust Valve                          6           15.7             $94.20          


Valve Springs                          12          4.35             $52.20          


Valve Stem Seal  Viton, Low Friction   6           3                $18.00          


Exhaust Sleeve,  Cyl. Head to          6           30               $180.00         

Ceramic Coated   Manifold                                                          


Labor to         Exhaust Sleeves       1           50               $50.00          

Install                                                                             


Drill and Tap                          0.5         50               $25.00          

Broken Bolts                                                                        


Heli-Coil                              1           25               $25.00          


Shipping                               1           65               $65.00          


Shipping         Second Box            1           27               $27.00          


--------------------------------------------------------------------------------


Subtotal: $2,342.40

Tax: $0.00

Total: $2,342.40



Sent from my SM-G930V using Tapatalk


Nick_______________________________
1964 Monza Spyder Convertible #435 - Rotisserie restored
Check out my restoration thread here: http://corvaircenter.com/phorum/read.php?1,681169
Recreational Mechanic/CORSA Member/COG Supporting Member/Navy Veteran

User avatar
Nickshu
Posts: 809
Joined: Tue Jun 11, 2013 7:57 pm
Location: Northern Colorado, USA

Re: For Sale - 1964 Turbo Cylinder Heads

Unread post by Nickshu » Sat Dec 30, 2017 7:38 am

FWIW Ken Hand has offered to repair the cylinder #3 dings if desired for a small fee before shipping. He has also offered to remove all the valves and verify clearances for any interested buyer's piece of mind.

See comments here: http://corvaircenter.com/phorum/read.php?1,956670
Nick_______________________________
1964 Monza Spyder Convertible #435 - Rotisserie restored
Check out my restoration thread here: http://corvaircenter.com/phorum/read.php?1,681169
Recreational Mechanic/CORSA Member/COG Supporting Member/Navy Veteran

User avatar
Nickshu
Posts: 809
Joined: Tue Jun 11, 2013 7:57 pm
Location: Northern Colorado, USA

Re: For Sale - 1964 Turbo Cylinder Heads

Unread post by Nickshu » Mon Jan 01, 2018 12:10 pm

Happy New Years bump! Make me an offer...these heads need a good home on your engine if they are what you are looking for! Not doing any good sitting in Ken's shop. :-)
Nick_______________________________
1964 Monza Spyder Convertible #435 - Rotisserie restored
Check out my restoration thread here: http://corvaircenter.com/phorum/read.php?1,681169
Recreational Mechanic/CORSA Member/COG Supporting Member/Navy Veteran

User avatar
Nickshu
Posts: 809
Joined: Tue Jun 11, 2013 7:57 pm
Location: Northern Colorado, USA

Re: For Sale - 1964 Turbo Cylinder Heads

Unread post by Nickshu » Fri Jan 05, 2018 5:12 pm

Weekend bump...somebody needs these. Make me an offer! Ken will repair #3 if desired for a small fee and verify clearances, but things are pretty much new so should be good to go!

Why buy a set that needs $$$ to be rebuilt when you could have a set that's done by one of the great and most respected Corvair machinists!!
Nick_______________________________
1964 Monza Spyder Convertible #435 - Rotisserie restored
Check out my restoration thread here: http://corvaircenter.com/phorum/read.php?1,681169
Recreational Mechanic/CORSA Member/COG Supporting Member/Navy Veteran

Post Reply

Return to “Parts For Sale”