2017 Full Bearing Throttle Linkage - New Versions - Lower Prices

Buy or Sell Corvair parts.
Forum rules
All Classified posts will be automatically deleted approximately 90 days after posting.
Post Reply
rlp11
Posts: 13
Joined: Fri Dec 18, 2009 9:47 am

2017 Full Bearing Throttle Linkage - New Versions - Lower Prices

Unread post by rlp11 » Mon Jan 02, 2017 12:05 pm

FULL BEARING THROTTLE LINKAGE

2017 will mark the seventh year that I have been building the Full Bearing Throttle Linkage Kits and Pivots. I never raised the price in those six years and now I want to thank all of you who have supported me. So to show my thanks I have reduced the price of the best-selling kits, the 110 or Two Carb kits, both types of 140hp kits and both Trans Pivots. OK now for the sales pitch.

Are you tired of all the slop and binding of your stock throttle linkage? I was, so in January 2010 I designed the ‘Full Bearing Throttle Linkage’ kits. All pivoting points have been replaced with a Zinc plated Heim joint with steel races. All nuts, bolts and washers are Stainless Steel as is the cross shaft and all round and hex rods. I buff the Stainless Steel cross shaft and the rods so they look like Chrome. All flat metal is bright clear Zinc plated so nothing will rust or corrode. Secondary bell crank pivots, Turbo Kit and the Trans and Tunnel Pivots use a sealed R6 ball bearing unit. All kits will work in an FC. For FC I will need to know if your FC has a manual or PG trans. FC with PG trans get, at no charge, an additional rod arm for the transmission kick down rod.

Price list for Linkage Kits and Pivots:
1960 2 Carb Kit - $120
1961 110 or 2 Carb Kit for Manual Chokes - $100 w/templates to mod your choke cable mounts.
1961-69 110 2-carb kit - $100
1965 140hp Complete kit - $220
1966-69 140hp Complete kit - $250
Holly 390 4 Barrel Kit - $100 -- No modification to the stock Accelerator Rod
Turbo Kit with Adjustable Link - $100
Turbo Kit with without Adjustable Link - $90
Turbo Adjustable Link - $10
1961-65 4 speed Manual transmission Pivot - $90
1966-69 3 or 4 speed Manual Transmission Pivot with stock 5/16-18 bolt - $70
1966-69 3 or 4 speed Manual Transmission Pivot with bigger 3/8-16 bolt - $75
1961-64 Tunnel Pivot - $65
1965-69 Tunnel Pivot - $45

Shipping is $20 for up to three kits. No shipping for the pivots if purchased with a throttle kit. They fit in the same box. Otherwise Trans Pivot shipping is $14, Tunnel Pivot shipping is $7, Turbo Kit shipping is $14 and the Turbo Link shipping is $2. I will combine shipping to save some bucks. Please contact me for shipping cost to Canada and overseas locations.

I accept money orders and personal checks. PayPal is OK but add 4% to the total. Use email address ‘rlparent@cox.net’ for PayPal. All kits are built to order and take a few days to build, assemble and test fit everything. Kits will ship two or three days after payment is received.

A copy of the install instructions for any of my kits is available upon request, email only. All kits come with a color printed copy of the instructions. My seven page flyer is also available upon request. It has close up color pictures of the kits and ordering information.

Any questions drop me a line at rlparent@cox.net

My Address:
Roger Parent
1349 Clove St.
El Cajon, CA 92021

Thanks again for your support.
Roger Parent
Image
Image

rlp11
Posts: 13
Joined: Fri Dec 18, 2009 9:47 am

Re: 2017 Full Bearing Throttle Linkage - New Versions - Lower Prices

Unread post by rlp11 » Mon Jan 02, 2017 12:08 pm

Can't seem to get the pictures to come up. Try again.

Image
Image


rlp11
Posts: 13
Joined: Fri Dec 18, 2009 9:47 am

Re: 2017 Full Bearing Throttle Linkage - New Versions - Lower Prices

Unread post by rlp11 » Mon Jan 02, 2017 12:48 pm

One more try

Image

Image

66vairguy
Posts: 1070
Joined: Tue Dec 21, 2010 3:44 pm

Re: 2017 Full Bearing Throttle Linkage - New Versions - Lower Prices

Unread post by 66vairguy » Tue Jan 03, 2017 7:59 pm

I've bought/installed two of Roger's linkage kits. A good product and he is great to work with.
Illustrated instructions are included with each kit.

Post Reply

Return to “Parts For Sale”

Who is online

Users browsing this forum: No registered users and 1 guest